Dell W-7030 AOS 6.4.x User Guide - Page 966

Table 206: Default Voice Net Services and Ports Net Service Name Protocol Port svc-sccp TCP 2000 ALG SCCP svc-sip-tcp TCP 5060 SIP svc-sip-udp - - SIP svc-sips - - SIP svc-noe UDP 32512 NOE svc-h323-udp UDP 1718, 1719 H.323 svc-h323-tcp TCP 1720 H.323 svc-vocera - - VOCE RA svc-svp - None SVP Creating Custom Net Services You can use CLI to create or modify net services. (host)(config)# netservice [service name] [protocol] [port] [alg] To create an svc-noe service on UDP port 32522, enter: (host) (config)# netservice svc-noe udp 32522 alg noe Configuring User Roles In the user-centric network, the user role of a wireless client determines its privileges and the type of traffic that it can send or receive in the wireless network. You can configure roles for clients that use mostly data traffic, such as laptops, and roles for clients that use mostly voice traffic, such as VoIP phones. Although there are different ways for a client to derive a user role, in most cases the clients using data traffic are assigned a role after they are authenticated through a method such as 802.1X, VPN, or captive portal. The user role for VoIP phones is derived from the OUI of their MAC addresses or the SSID to which they associate. Refer to Roles and Policies on page 438 for details on how to create and configure a user role. This section describes how to configure voice user roles with the required privileges and priorities. Dell controller provides default user roles for all voice services. You can do one of the following: l Use default user roles l Create or modify user roles l Use user-derivation roles Using the Default User Role The controller is configured with the default voice role. This role has the following settings: l No limit on upload or download bandwidth 966 | Voice and Video Dell Networking W-Series ArubaOS 6.4.x | User Guide