Dell W-7030 AOS 6.4.x User Guide - Page 880

Table 183: CSR Parameters Parameter Description CSR Type Type of the CSR. You can generate a certificate signing request either with an Elliptic curve (EC) key, or with a Rivest-Shamir-Aldeman (RSA) key. Range ec/rsa Curve name Length of the private/public key for ECDSA. This is applicable only if CSR Type is ec. secp256r1/secp384 r1 Key Length Common Name Length of the private/public key for RSA. This is applicable only if CSR Type is rsa. NOTE: RSA-1024 is not permitted if the controller is operating in the FIPS mode. Typically, this is the host and domain name, as in www.yourcompany.com. 1024/2048/4096 - Country Two-letter ISO country code for the country in which your organization is located. State/Province State, province, region, or territory in which your organization is located. City City in which your organization is located. Organization Name of your organization. Unit Optional field to distinguish a department or other unit within your organization. Email Address Email address referenced in the CSR. 3. Click Generate New. 4. Click View Current to display the generated CSR. Select and copy the CSR output between the BEGIN CERTIFICATE REQUEST and END CERTIFICATE REQUEST lines, paste it into an email and send it to the CA of your choice. In the CLI 1. Run the following command: crypto pki csr {rsa key_len |{ec curve-name } common_name country state_or_province city organization unit email RSA-1024 is not permitted if the controller is operating in the FIPS mode. 2. Display the CSR output with the following command: show crypto pki csr Dell Networking W-Series ArubaOS 6.4.x | User Guide Management Access | 880