Dell W-7030 AOS 6.4.x User Guide - Page 791

Parameter Description To filter the output of this table to show only specific duty cycle values or a range of values types, click the icon in the column heading then select one of the following options: l Select Any to display all entries, regardless of duty cycle value. l To display entries within a specific range of duty cycles, enter the minimum duty cycle percentage in the Min field and enter the maximum duty cycle percentage in the Max field. Click OK to save your settings and return to the Active Devices table. Discovered The time at which the device was first discovered by the spectrum monitor or hybrid AP. To filter the output of this table to show devices discovered within a specific time, click the icon in the column heading. Select Any to display all entries, regardless of when the device was discovered. To display entries for devices discovered within a specific time range: 1. Select the button by the Less than drop down list. 2. Click the Less than drop-down list and select either Less than or More than to limit the output of this table to devices discovered earlier or after a specified number of hours or minutes. 3. Enter the number of hours or minutes in the time range you want apply to this filter. 4. Click the min. drop down list and select either min. or hrs. to define the time range in minutes or hours. 5. Click OK to save your settings and return to the Active Devices table. Activity Duration Amount of time that the device has been active. To filter the output of this table to show devices that have been active within a specific time range, click the icon in the column heading. Select Any to display all entries, regardless of how long the device has been active. To display entries for devices active for a specific time range: 1. Select the button by the > symbol. 2. Click drop-down list with the > symbol and select either > (greater than), < (less than), = (more than or equal to) to limit the output of this table to devices that have been active for a specified time range. 3. Enter the number of hours or minutes in the time range you want apply to this filter. 4. Click the min. drop down list and select either min. or hrs. to define the time range in minutes or hours. 5. ClickOK to save your settings and return to the Active Devices table. Channels Affected Radio channels affected by the device's transmission. The Active Devices table for a spectrum monitor shows entries for all devices by default, regardless of the channels their transmissions may affect. To filter the output of this table to show devices that affect a specific channel or range of channels, click the icon in the column heading. l Select Any to display all entries, regardless of the channels that device may affect. l Select Single Channel, then enter the channel value to only display devices that affect the specified channel. 791 | Spectrum Analysis Dell Networking W-Series ArubaOS 6.4.x | User Guide