Dell W-7030 AOS 6.4.x User Guide - Page 521

Table 103: ARM Profile Configuration Parameters Setting Description Default: 50% Error Rate Wait Time Minimum time in seconds the error rate has to exceed the Error Rate Threshold before it triggers a channel change. Default: 30 seconds Channel Quality Aware Arm Select this checkbox to allow ARM to initiate a channel change due to low quality on the current channel. Channel Quality Threshold Channel quality percentage below which ARM initiates a channel change. Range: 0-100% Default: 70%. Channel Quality Wait Time If channel quality is below the specified channel quality threshold for this wait time period, ARM initiates a channel change. Range:1-3600 seconds Default: 120 seconds. Minimum Scan Time Minimum number of times a channel must be scanned before it is considered for assignment. Range: 0-2,147,483,647 scans. It is recommended to use a Minimum Scan Time between 1-20 scans. Default: 8 scans Load Aware Scan Threshold Load aware ARM preserves network resources during periods of high traffic by temporarily halting ARM scanning if the load for the AP gets too high. The Load Aware Scan Threshold is the traffic throughput level an AP must reach before it stops scanning. Range: 0-20,000,000 bytes/second. (Specify 0 to disable this feature.) Default: 1250000 Bps 521 | Adaptive Radio Management Dell Networking W-Series ArubaOS 6.4.x | User Guide