Dell W-7030 AOS 6.4.x User Guide - Page 820

Recording Spectrum Analysis Data The spectrum analysis tool allows you to record up to 60 continuous minutes (or up to 10 Mb) of spectrum analysis data. By default, each spectrum analysis recording displays data for the Real-Time FFT, FFT Duty Cycle, Interference Power and Swept Spectrogram charts, however, you can view recorded device data for any the spectrum analysis charts supported by that spectrum monitor radio. Configurable recording settings allow you to start a recording session immediately, or schedule a recording to begin at a later date and time. Each recording can be scheduled to end after a selected amount of time has passed, or continue on until the recorded data file reaches a specified size. You can save the file to your spectrum monitor client, then play back that data at a later time. Creating a Spectrum Analysis Record To record spectrum analysis data for later analysis: 1. Navigate to the Monitoring > Spectrum Analysis > Spectrum Dashboards window. 2. Click Record at the top of the window. The New Recording popup window appears. 3. Click the Record From link, and select the spectrum monitor whose data you want to record. 4. Next, decide whether you want the recording to start immediately, or at a later scheduled time. If you want the recording to start immediately, select When the OK button is clicked. To schedule a different starting time for the recording, click the date and time drop-down lists to select a starting month, day, year and time. 5. The recording continues until either the specified amount of time has passed, or until the recording files reaches a selected size. Click the Length of recording reaches drop down list and select the amount of time the recording should last, or click the Data file reaches drop down list and select the maximum file size for the recording. 6. Click OK to save your settings. If you selected the When the OK button is clicked in step 5, the recording begins. Figure 136 Recording Spectrum Analysis Data While the recording is in progress, a round, red recording icon and recording status information appears at the top of the spectrum dashboard. You can view data for other spectrum monitors and charts while the recording is in progress. If you want to stop the recording before recording period has finished, click Stop by the recording status information. When you the Stop, a popup window appears and allows you to stop and delete the current recording, stop and save the recording in its current state (before it has completed), or continue recording again. Dell Networking W-Series ArubaOS 6.4.x | User Guide Spectrum Analysis | 820