Dell XPS 13 9310 Service Manual - Page 28
Display assembly, Removing the display assembly
View all Dell XPS 13 9310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1. Align the screw holes on the heat-sink and fan assembly with the screw holes on the system board. 2. In sequential order (as indicated on the heat-sink and fan assembly), tighten the four captive screws (M2x3) that secure the heat-sink and fan assembly to the system board. 3. Replace the four screws (M1.6x2.5) that secure the fans to the system board. 4. Connect the fan cables to the system board. 5. Adhere the tape that secures the fan cables to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following images indicate the location of the display assembly and provide a visual representation of the removal procedure. 28 Removing and installing components