Dell XPS 13 9310 Service Manual - Page 40
Status-light board, Removing the status-light board
View all Dell XPS 13 9310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Next steps 1. Install the display assembly. 2. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive. 3. Install the heat sink (for computers shipped with 11th Generation Intel Core i3-1115G4 processor). NOTE: The system board can be removed or installed together with the heat sink attached. This simplifies the procedure and avoids breaking the thermal bond between the system board and the heat sink. 4. Install the fans (for computers shipped with 11th Generation Intel Core i3-1115G4 processor). 5. Install the heat-sink and fan assembly (for computers shipped with 11th Generation Intel Core i5-1135G7 processor or 11th Generation Intel Core i7-1165G7 processor). 6. Install the battery. 7. Install the base cover. 8. Follow the procedure in After working inside your computer. Status-light board Removing the status-light board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the status-light board and provides a visual representation of the removal procedure. Steps 1. Lift the latch and disconnect the status-light board cable from the keyboard-control daughterboard on the palm-rest and keyboard assembly. 2. Using a plastic scribe, pry the status-light board by its right side. 3. Carefully peel the status-light board from the palm-rest and keyboard assembly. 40 Removing and installing components