Dell XPS 13 9310 Service Manual - Page 39

Route the left and right antenna cables through the routing guides on the palm-rest and keyboard assembly toward

Get Dell XPS 13 9310 PDF manuals and user guides View all Dell XPS 13 9310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Steps 1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 2. Replace the four screws (M1.6x1.5) that secure the system board to the palm-rest and keyboard assembly. 3. Replace the three screws (M1.2x2) that secure the system board to the palm-rest and keyboard assembly. 4. Replace the four screws (M1.4x4) that secure the system board to the palm-rest and keyboard assembly. 5. Connect the power-button and fingerprint reader cable to the system board and close the latch to secure the cable. 6. Connect the right speaker cable to the system board. 7. Connect the keyboard cable to the system board and close the latch to secure the cable. 8. Connect the touchpad cable to the system board and close the latch to secure the cable. 9. Connect the left speaker cable to the system board. 10. Route the left and right antenna cables through the routing guides on the palm-rest and keyboard assembly toward the wireless card. 11. Connect the antenna cables to the wireless card. 12. Align the screw hole on the wireless-card bracket with the screw hole on the system board. NOTE: Ensure that tab on the wireless-card bracket is inserted into the slot in the system board. 13. Tighten the captive screw (M1.6x2.3) that secures the wireless-card bracket to the system board. Removing and installing components 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Steps
1.
Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2.
Replace the four screws (M1.6x1.5) that secure the system board to the palm-rest and keyboard assembly.
3.
Replace the three screws (M1.2x2) that secure the system board to the palm-rest and keyboard assembly.
4.
Replace the four screws (M1.4x4) that secure the system board to the palm-rest and keyboard assembly.
5.
Connect the power-button and fingerprint reader cable to the system board and close the latch to secure the cable.
6.
Connect the right speaker cable to the system board.
7.
Connect the keyboard cable to the system board and close the latch to secure the cable.
8.
Connect the touchpad cable to the system board and close the latch to secure the cable.
9.
Connect the left speaker cable to the system board.
10.
Route the left and right antenna cables through the routing guides on the palm-rest and keyboard assembly toward the
wireless card.
11.
Connect the antenna cables to the wireless card.
12.
Align the screw hole on the wireless-card bracket with the screw hole on the system board.
NOTE:
Ensure that tab on the wireless-card bracket is inserted into the slot in the system board.
13.
Tighten the captive screw (M1.6x2.3) that secures the wireless-card bracket to the system board.
Removing and installing components
39