Dell XPS 13 9310 Service Manual - Page 37
Installing the system board, System-board connectors
View all Dell XPS 13 9310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing the system board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. About this task The following image indicates the connectors on your system board. Figure 2. System-board connectors 1. Power-button and fingerprint reader cable 3. Right speaker cable 5. Left speaker cable 2. Touchpad cable 4. Keyboard cable The following images indicate the location of the system board and provide a visual representation of the installation procedure. Removing and installing components 37