Dell XPS 13 9365 2-in-1 XPS 13 Convertible Service Manual - Page 26

Removing the display assembly, Prerequisites, Procedure

Get Dell XPS 13 9365 2-in-1 PDF manuals and user guides View all Dell XPS 13 9365 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

17 Removing the display assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites • Procedure Prerequisites 1. Remove the base cover. 2. Remove the battery. 3. Disconnect the wireless card. Procedure 1. Peel off the tape that secures the display cable to the hard-disk plate. 2. Remove the two screws (M1.6x2.5) securing the display cable bracket to the system board 3. Lift the display cable bracket off the display cable. 4. Using the pull tab, disconnect the display cable from the system board. 5. Disconnect the touch-screen cable from the system board. 6. Disconnect the camera cable from the system board. 26 Removing the display assembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
Removing the display assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After
working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1.
Remove the
base cover
.
2.
Remove the
battery
.
3.
Disconnect the
wireless card
.
Procedure
1.
Peel off the tape that secures the display cable to the hard-disk plate.
2.
Remove the two screws (M1.6x2.5) securing the display cable bracket to the system board
3.
Lift the display cable bracket off the display cable.
4.
Using the pull tab, disconnect the display cable from the system board.
5.
Disconnect the touch-screen cable from the system board.
6.
Disconnect the camera cable from the system board.
17
26
Removing the display assembly