Dell XPS 13 9365 2-in-1 XPS 13 Convertible Service Manual - Page 9
Removing the base cover, Procedure
![]() |
View all Dell XPS 13 9365 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3 Removing the base cover NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure Procedure 1. Remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly. 2. Using your fingertips, open the system badge. 3. Remove the screw (M1.6x4) under the system badge that secures the base cover to the palm-rest assembly. 4. Starting from the front corner of the computer, pry up the base cover using a plastic scribe and lift the base cover off the palm-rest assembly. Removing the base cover 9
![](/manual_guide/products/dell-xps-13-9365-2in1-xps-13-convertible-service-manual-2bdd282/9.png)