Dell XPS 27 7760 XPS 27 Service Manual - Page 100
Replacing the converter board, Procedure, Post-requisites
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Replacing the converter board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Align the screw holes on the converter board with the screw holes on the middle frame. 2 Replace the three screws (M3X4) that secure the converter board to the middle frame. 3 Connect the converter-board cable to the converter board. 4 Connect the backlight power cables to the converter board. Post-requisites 1 Replace the I/O panel. 2 Replace the inner frame. 3 Replace the system-board shield. 4 Replace the stand. 5 Replace the back cover. 6 Replace the USB dongle-bay cover. 100
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/100.png)