Dell XPS 27 7760 XPS 27 Service Manual - Page 92
Replacing the diagnostic light and button board, Procedure, Post-requisites
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Replacing the diagnostic light and button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Align the screw holes on power diagnostic button and light board to the screw holes on the I/O-panel bracket. 2 Replace the screw that secure the power diagnostic button and light board to the I/O-panel bracket. 3 Align the tabs on the I/O-panel bracket with the slots on the I/O panel and snap the I/O-panel bracket in place. Post-requisites 1 Replace the I/O panel. 2 Replace the inner frame. 3 Replace the system-board shield. 4 Replace the stand. 5 Replace the back cover. 6 Replace the USB dongle-bay cover. 92
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/92.png)