Dell XPS 27 7760 XPS 27 Service Manual - Page 104
Removing the power-button board, Prerequisites, Procedure
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Removing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the USB dongle-bay cover. 2 Remove the back cover. 3 Remove the stand. 4 Remove the inner frame. Procedure NOTE: Note the routing of the cable as you remove it so that you can reroute it correctly after you replace the power-button board. 1 Remove the two screws (M2X3) that secures the power-button board shield to middle frame. 2 Remove the power-button cable from the routing guide on the power-button board shield. 3 Lift the power-button board shield off the middle frame. 4 Lift the power-button board off the slot on the middle frame. 5 Disconnect the power-button board cable from the power-button board. 104
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/104.png)