Dell XPS 27 7760 XPS 27 Service Manual - Page 58
Replacing the wireless card, Procedure
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the wireless card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure CAUTION: To avoid damaging the wireless card, do not place any cables under it. 1 Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card into the wireless-card slot. 2 Route the antenna cable through the routing guide. 3 Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer: Table 2. : Wirelesscard colour scheme Connectors on the wireless card Main (white triangle) Antenna-cable color White Auxiliary (black triangle) Black 4 Press down the other end of the wireless card and align the screw hole on the wireless-card bracket and wireless card with the screw hole on the system board. 5 Replace the screw (M2X2.5) that secures the wireless-card bracket and the wireless card to the system board. 6 Align the screw holes on the wireless-card shield with the screw holes on the system board. 7 Replace the two screws (M2X2.5) that secures the wireless-card shield to system board. 58
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/58.png)