Dell XPS 27 7760 XPS 27 Service Manual - Page 81
Removing the I/O panel, Prerequisites, Procedure
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Removing the I/O panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the USB dongle-bay cover. 2 Remove the back cover. 3 Remove the stand. 4 Remove the system-board shield. 5 Remove the inner frame. Procedure 1 Press the securing clip to release the power button cable from its connector. 2 Press the securing clip to release the diagnostic button and light cable from its connector. 3 Disconnect the USB dongle cable from the system board. 4 Remove the four screws (M3X4) that secure the I/O panel to the middle frame and system board. 81
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/81.png)