Dell XPS 27 7760 XPS 27 Service Manual - Page 87
Replacing the USB-dongle port, Procedure, Post-requisites
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Replacing the USB-dongle port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Route the USB dongle port cable into the slot on I/O panel . 2 Route the USB dongle port cable through the routing guide on I/O panel . 3 Align the screw holes on the USB dongle port to the screw holes on the I/O panel. 4 Replace the three screws (M3X4) that secure the USB dongle port to the I/O panel. Post-requisites 1 Replace the I/O panel. 2 Replace the system-board shield. 3 Replace the inner frame. 4 Replace the stand. 5 Replace the back cover. 6 Replace the USB dongle-bay cover. 87