Dell XPS 27 7760 XPS 27 Service Manual - Page 75
Removing the display built-in self test button board, Prerequisites, Procedure
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Removing the display built-in self test button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the USB dongle-bay cover. 2 Remove the back cover. 3 Remove the stand. 4 Remove the inner frame. Procedure 1 Remove the power-button cable from the routing guide on the power-button board shield. 2 Remove the two screws (M2X3) that secure the power-button board shield to the middle frame. 3 Lift the power-button board shield off the middle frame. 4 Disconnect the Display Built-in Self Test button cable from the power-button board. 5 Remove the Display Built-in Self Test button cable from the routing guide on the middle frame. 6 Remove the two screws (M2X3) that secure the Display Built-in Self Test button board to the middle frame. 75
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/75.png)