Dell XPS 27 7760 XPS 27 Service Manual - Page 141
Post-requisites, Clearing CMOS settings, Procedure
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Post-requisites 1 Replace the system-board shield. 2 Replace the stand. 3 Replace the back cover. 4 Replace the USB dongle-bay cover. Clearing CMOS settings WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the USB dongle-bay cover. 2 Remove the back cover. 3 Remove the stand. 4 Remove the system-board shield. Procedure 1 Locate the CMOS reset jumper on the system board. NOTE: For more information on the location of the CMOS reset jumper, see "System board components". 2 Remove the jumper plug from the password jumper-pins and connect it to the CMOS jumper-pins. 141