Dell XPS 27 7760 XPS 27 Service Manual - Page 106
Replacing the power-button board, Procedure, Post-requisites
![]() |
View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Replacing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Connect the power-button board cable and Display Built-in Self Test button cable to the power-button board. 2 Align the power-button board to the slot on the middle frame and place the power-button board on the middle frame. 3 Align the screw holes on power-button board shield to the screw holes on middle frame. 4 Replace the two screws (M2X3) that secures the power-button board shield to middle frame. 5 Route the power-button cable through the routing guides on the power-button board shield. Post-requisites 1 Replace the inner frame. 2 Replace the stand. 3 Replace the back cover. 4 Replace the USB dongle-bay cover. 106
![](/manual_guide/products/dell-xps-27-7760-xps-27-service-manual-c7e1da2/106.png)