Dell XPS 27 7760 XPS 27 Service Manual - Page 96

Replacing the hard-drive cage, Procedure, Post-requisites

Get Dell XPS 27 7760 PDF manuals and user guides View all Dell XPS 27 7760 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

Replacing the hard-drive cage WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Align the screw holes on the interposer with the screw holes on the hard-drive cage. 2 Replace the four screws (M2X3) that connects the interposer to the hard-drive cage. 3 Align the screw holes on the hard-drive cage to the screw holes on the middle frame. 4 Replace the four screws (M3X4) that secure the hard-drive cage to the middle frame. 5 Connect the hard-drive data cables and the hard-drive power cable to the system board. NOTE: Connect the blue-colored cable at the top and red-colored cable to the bottom of the hard-drive age. 6 Route the cables through the guide and close the clip to secure the cables. Post-requisites 1 Replace the I/O panel. 2 Replace the system-board shield. 3 Replace the stand. 4 Replace the hard drive. 5 Replace the back cover. 6 Replace the USB dongle-bay cover. 96

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
Replacing the hard-drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Align the screw holes on the interposer with the screw holes on the hard-drive
cage.
2
Replace the four screws (M2X3) that connects the interposer to the hard-drive
cage.
3
Align the screw holes on the hard-drive cage to the screw holes on the middle
frame.
4
Replace the four screws (M3X4) that secure the hard-drive cage to the middle
frame.
5
Connect the hard-drive data cables and the hard-drive power cable to the
system board.
NOTE: Connect the blue-colored cable at the top and red-colored cable
to the bottom of the hard-drive age.
6
Route the cables through the guide and close the clip to secure the cables.
Post-requisites
1
Replace the
I/O panel
.
2
Replace the
system-board shield
.
3
Replace the
stand
.
4
Replace the
hard drive
.
5
Replace the
back cover
.
6
Replace the
USB dongle-bay cover
.
96