Denon D-F101S Owners Manual - Page 14

ENGLISH (2) Presetting AM and FM stations Example: To preset the currently tuned in FM station at preset number "3" 1, 3 2 FUNCTION TONE SYSTEM ON / STANDBY PHONES TIMER DISPLAY MEMORY / SET TUNING DOWN UP BAND SOURCE DIRECT VOLUME AM-FM STEREO RECEIVER DRA-F101 Press the MEMORY/SET button. • The "P.SET", "MEMO" indicator flashes. MEMORY / SET • Depending on what preset number is displayed before the button is pressed, the preset number section flashes as shown 1 below and the setting standby mode is set. When "01" to "10" or "0-" is displayed, "0-" flashes. When "11" to "20" or "1-" is displayed, "1-" flashes. When "21" to "30" or "2-" is displayed, "2-" flashes. When "31" to "40" or "3-" is displayed, "3-" flashes. While the "MEMO" indicator is flashing, press the TUNING UP button three times to display "P.SET", "03". TUNING DOWN UP 2 ✽ To store the station at a different preset number, use the tuning buttons (TUNING UP or DOWN) to set the desired preset number. Press the MEMORY/SET button again while the "MEMO" 3 indicator is flashing. • The "MEMO" indicator turns off and the station is preset. MEMORY / SET ✽ When operating with the system remote control unit, first set the remote control unit's function selector switch to "TUNER". Procedure CD TUNER MD TAPE (RC-927) MEMORY / SET 3 / / MEMORY / SET DRA-F101 (this unit) (RC-927) DRA-F101 (this unit) • This setting can also be made by pressing the TUNING button instead of pressing "e". • To store the station at a different preset number, use the number buttons and the +10 button on the system remote control unit (RC-927) to set the desired preset number. Examples: To store the station at preset number 12: Press +10 , 2 To store the station at preset number 29: Press +10 , +10 , 9 Presetting • When a station is preset, both the reception frequency and reception mode are stored in the memory. • If a station is preset at a number where another station is already preset, the previous station is erased and the new station is set. • The preset memory is not erased immediately if the power supply is cut off momentarily. ✽ A total of 40 AM and FM stations can be preset using this procedure. (3) Tuning in Preset Stations Example: To tune in the station stored at preset number "3" ✽ When operating with the system remote control unit, first set the remote control unit's function selector switch to "TUNER". CD TUNER MD TAPE (RC-927) Procedure: • Instead of pressing e, the preset 3 channel can also be called out by pressing the < or > button to display "P.SET 03". • To call the station at a different preset number, use the number buttons and the +10 button on the system remote control unit (RC-927) to set the desired preset number. Examples: To call the station at preset number 12: Press +10 , 2 To call the station at preset number 29: Press +10 , +10 , 9 14