Denon D-F101S Owners Manual - Page 17

ENGLISH (5) Timer function (when connected in a system with the DCD-F101) 2 The power can be set to turn on and off at a specific time or at the same time everyday, in any modes: tuner ("TUNER"), CD player ("CD"). (6) Setting the Sleep Timer 2 With this function, the power can be set to turn off after 10 to 60 minutes, in steps of 10 minutes, using the remote control unit. RC-927 (system remote control unit) 1,2 + - TAPE SLEEP FUNCTION MODE CD TUNER MD TAPE Cancelling the Sleep Timer Press the SLEEP button repeatedly until the "SLEEP" indicator turns off. The sleep timer is also canceled if the power operation switch or the power operation switch on the remote control unit is pressed, turning the system power off. Example: To turn the power off after 50 minutes. (This operation is only possible from the remote control unit (RC-927).) Press the SLEEP button. NOTE: If a several timer operations are set at once, the sleep timer has priority. 1 10 SYSTEM FUNCTIONS 2 Operation is even easier when the DCD-F101 is connected to the DRA-F101 with system connection. (For instructions on connections, refer to "CONNECTIONS" on page 6, 7.) 2 All the system function signals for operating the DCD-F101 are output from the DRA-F101, so be sure to connect the DRA-F101 when making system connection. 2 The system functions will only work when the DCD-F101 is connected. They will not work with other components. 2 When system connections are made, the system functions described below can be used. (1) The system remote control unit (RC-927) included with the DRA-F101 can be used to perform the main operations on the DCD-F101. (2) The remote control signals of the DCD-F101 are received by the DRA-F101's remote sensor. (3) Auto function selection: The function automatically switches when the PLAY/PAUSE button ( 1 3 ) on the DCD-F101, is pressed, and playback begins. (4) Timer functions: The timer functions on the stereo receiver (DRA-F101) can be used to start playback at set times. The sleep timer can also be used. 2 For instructions on the various operations, refer to the components' operating instructions. Press the SLEEP button again while the "SLEEP" indicator is flashing. 2 The previous display reappears after 5 seconds. 3 The "SLEEP" indicator remains lit, indicating that the sleep timer is functioning. • The time is reset to "60" (60 minutes) if the SLEEP button is pressed again while the sleep timer is functioning. 17