Denon DVD-2800Mk.II Owners Manual - Page 12

ENGLISH 2 Sound output from the DVD-2800's digital audio output connectors DVD video DVD audio (video part only) Video CD Music CD MP3 CD Linear PCM Audio recording format Settings Dolby Digital Digital out : Normal Digital out : PCM conversion Digital out : Normal DTS Digital out : PCM conversion 48 kHz LPCM conversion mode : OFF LPCM conversion mode : ON 96 kHz LPCM conversion mode : ON CP : ON LPCM conversion mode : OFF CP : OFF LPCM conversion mode : OFF MPEG 1 Linear PCM MP 3 Refer to page Digital audio data output Dolby Digital bitstream 2 channels PCM data (48 kHz/16bit) 42 DTS bitstream DTS bitstream 48 kHz/16 ~24 bit PCM 48 kHz/16 bit PCM 43 48 kHz/16 bit PCM No output data (when copy-protected) 96 kHz PCM (when not copy-protected) 44.1 kHz/16 bit PCM 44.1 kHz/16 bit PCM 32 ~ 48 kHz/16 bit PCM • Linear PCM audio is the signal recording format used for music CDs. While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing higher sound quality than music CDs. • When "OFF" is selected, digital signals are not output from the digital audio output at this time. (4) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.) ✽ Set the "AUDIO SETUP" default setting as shown below. (See TV page 43.) • "DIGITAL OUT" → "PCM" "LPCM SELECT" → "ON" Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers. • Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" comply with your TV's video format. When the TV is NTSC formated, set to NTSC. (See page 41.) VIDEO IN DVD-2800 B 8 9 AUDIO OUT DIGITAL OUT (PCM/BITSTREAM) L OPTICAL COAXIAL R VIDEO OUT COMPONENT VIDEOOUT Y PB/CB S-VIDEO OUT PR/CR Digital audio input connector (OPTICAL) Digital audio input connector (COAXIAL) 12