Dewalt DXCMH1393075 Instruction Manual - Page 4

English • Even when the engine is used correctly, CO may leak into your home. ALWAYS use a battery-powered or battery backup CO alarm (not supplied) in the home. Read and follow all directions for CO alarm before using. If you start to feel sick, dizzy or weak at anytime, move to fresh air immediately. See a doctor. You could have carbon monoxide poisoning. WARNING: Do not operate this unit until you read this instruction manual and the engine instruction manual for safety, operation and maintenance instructions. WARNING: This product may not be equipped with a sparkarresting muffler. If the product is not equipped and will be used around flamm­ a­ble mat­ eria­ ls or on land covered with materials such as agricultural crops, forest, brush, grass or other similar items, then an ap­proved spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sec­tions 4442 and 4443 of the California Public Re­sourc­es Code, unless the engine is equipped with a spark arrester, as defined in section 4442, and maintained in ef­fec­tive work­ing order. Spark arresters are also required on some U.S. For­est Service land and may also be legally required under other statutes and or­di­nanc­es. WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. WARNING: Some dust contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm such as asbestos and lead in lead based paint. WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. SAVE THESE INSTRUCTIONS DANGER: RISK OF EXPLOSION OR FIRE WHAT CAN HAPPEN HOW TO PREVENT IT • Spilled gaso­ l­ine and it's vapors can bec­ ome ignited from cigarette sparks, electrical arcing, exhaust gase­ s and hot engine components such as the muffler. • Shut off eng­ ine and allow it to cool before adding fuel to the tank. • Use care in filli­ng tank to avoid spilli­ng fuel. Move unit away from fueling area before starting eng­ ine. • Heat will exp­ and fuel in the tank which could result in spillage and poss­ i­ble fire explosion. • Keep maximum fuel level 1/2" (12.7 mm) bel­ow bottom of filler neck to allow for expansion. 4