Edimax 3G-6200nL V2 Manual - Page 27
Using, Static IP, as broadband connection type
View all Edimax 3G-6200nL V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2-4-3 Using "Static IP" as broadband connection type 1. If your ISP is providing you Internet access via a fixed IP address, select "Static IP". Generally, your ISP will provide you with such information as IP address, subnet mask, gateway address, and DNS address. Item Name Fixed IP Address Subnet Mask DNS Address 1 and 2 Default Gateway TTL Description Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Enter the primary and secondary DNS addresses assigned by your ISP here. Input the default gateway assigned by your ISP here. Some ISPs may call this "Default Route". Enable the "TTL" function if your ISP requires you to do so. NOTE: You must use the addresses provided by your ISP. Inputting incorrect values will cause malfunction. 2. Click "OK" to complete setup. 3. When the following message appears, click "Apply" to save the changes and restart the broadband router. The router will take about 60 seconds to restart. 26