Electrolux ERFC2393AS Complete Owners Guide - Page 13

13 DOOR REMOVAL  NOTE Upon replacement, the tube needs to be fully inserted up to the marking line. To reset door pin: If doors are removed at less than a 40 degree angle, the pin returns to the home position. It can be reset by turning the door upside down and using a 5/32" Allen wrench to rotate the left hand pin 90 degrees clockwise and the right hand pin 90 degrees counterclockwise. 3. Reinstall top hinges and screws. 4. Insert and feed water line back into the conduit at the top left door hinge until tube re-appears at rear of unit. Bottom of the Doors For RIGHT DOOR, turn pin 90˚ counterclockwise For LEFT DOOR, turn pin 90˚ clockwise Push Push 5. Reconnect all harnesses. Once the door pins are reset, follow the steps "To reinstall the refrigerator doors". 6. Replace top hinge covers and screws. 7. Reconnect water line to push-lock connection and reinstall water line bulkhead cover at rear of unit. 8. Reconnect electrical power cord to the wall outlet