Electrolux ERFC2393AS Complete Owners Guide - Page 8
Door opening, Cabinet Leveling & Refrigerator, Door Alignment if necessary
View all Electrolux ERFC2393AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 INSTALLATION NOTE If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider. Door opening Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of the refrigerator drawers and freezer baskets, the refrigerator should be in a position where both can be fully opened. Door Door Cabinet Leveling & Refrigerator Door Alignment (if necessary) Guidelines for final positioning of the refrigerator: • All four corners of the cabinet must rest firmly on the floor. • The front should be slightly elevated to ensure that doors close and seal properly. • Doors should align with each other and be level. Most of these conditions can be met by raising or lowering the adjustable anti-tip legs. To level the cabinet using the anti-tip legs: 1. Slightly open the freezer drawer to reveal anti-tip legs at bottom of cabinet. 2. Lower anti-tip legs until they are both touching the floor. Use a pair of pliers to adjust. To raise unit: turn leg clockwise if looking from the top. To lower unit: turn leg counterclockwise if looking from the top. NOTE Product is shipped with doors adjusted to the lowest position on the hinges. To make final door height adjustments: 1. Open the freezer drawer to access hinges for refrigerator doors. 2. Insert the 6mm AllenTM wrench into the shaft of the lower hinge. (Included with unit). To lower door: turn adjustment screw counter-clockwise if looking at the door from below. To raise door: turn adjustment screw clockwise if looking at the door from below. 3. Ensure both doors are bind-free with their seals touching the cabinet on all four sides and that cabinet is stable.