Electrolux ERFC2393AS Complete Owners Guide - Page 19
In-Door Water Dispenser Control Display, CONTROLS AND SETTINGS
View all Electrolux ERFC2393AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
19 CONTROLS AND SETTINGS In-Door Water Dispenser Control Display 1 Change Select Freezer or Refrigerator icon to change Temperature temperature. Press +/- buttons to set the temperature Freezer control -6˚F/-21˚C - range: +6˚F/-15˚C Refrigerator control range: +34˚F/+1˚C - +44˚F/+7˚C 2 Clear Alerts Resets any alarms that are active and illuminated on the display (DOOR OPEN, HIGH TEMP, POWER OUTAGE). 3 Freeze Boost Prior to grocery shopping, we recommend you activate FREEZE BOOST to lower the temperature and freeze food faster. FREEZE BOOST will remain active for up to 24 hours before automatically deactivating or manually exiting by pressing FREEZE BOOST to turn 1 the function off. This will reset the freezer to the previous temperature setting. 2 4 F/C Touch to toggle display from Fahrenheit to Celsius. 3 4 5 6 7 5 Ice Maker 6 Default Settings Press and hold for 3 seconds to turn ice maker on/off. When the indicator is lit, the ice maker is on. When the indicator is not lit, ice maker is in the OFF state and will stop making ice. While off, ice dispensing can continue as long as there is ice in the bucket. The indicator will blink when the ice maker is off and ice is dispensing. Press and hold for 3 seconds to reset to Factory settings. 8 7 Water Filter Press and hold button to reset after filter has been replaced, status shown at right of button will reset to GOOD. 8 Air Filters Clear Alerts DOOR OPEN An alarm sounds and the door open indicator illuminates on the display if the freezer or refrigerator doors have are left open for five minutes or more. Press "CLEAR ALERTS" to reset any system alarms. HIGH TEMP Alarm An alarm is played every 60 seconds and HIGH TEMP illuminates next to the clear alerts button in the event of a high temperature condition. Press the "CLEAR ALERTS" button to acknowledge and silence the alarm. The highest temp value will be displayed when the alarm is first acknowledged. Press and hold to reset after filter has been replaced, status shown at right of button will reset to GOOD. POWER OUTAGE The power outage alert illuminates in the event of a power outage. Press "CLEAR ALERTS" to acknowledge and silence the alarm. Other modes may be turned off until the alarm is acknowledged. The unit will continue normal operation while a power outage alert is displayed on the control panel. The high temp alarm may also stay illuminated until a safe operating temperature range is reached.