Electrolux ERFC2393AS Complete Owners Guide - Page 15
Door Handle Installation
![]() |
View all Electrolux ERFC2393AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
15 DOOR HANDLE INSTALLATION CAUTION Wear gloves and safety goggles. Use extreme CAUTION when installing these handles. Door Handle Mounting Instructions 1. Remove handles from carton and any other protective packaging. 2. Position refrigerator handle end over upper and lower pre-installed shoulder bolts (A) that are fastened into the door, ensuring the holes for the set screws are facing toward the opposite door. 3. While holding the handle firmly against the door, fasten furthermost upper and furthermost lower Allen set screws (B) with supplied Allen wrench. 4. Repeat steps 2 and 3 to install the opposite handle. Ensure the holes for the set screws are facing toward the first door. 5. Firmly tighten the inside Allen set screws. 6. Position the freezer handle end over left and right pre-installed handle shoulder bolts (A) that are fastened to the door, ensuring the holes for the set screws are facing down. 7. While holding the handle firmly against the door, loosely tighten the far right Allen set screw (B) with supplied Allen wrench until there is no gap between the handle and door. 8. Still holding the handle firmly to the door, firmly tighten the far left Allen set screw (B) with the supplied Allen wrench. 9. Return to the far right Allen set screw (B) and firmly tighten with the supplied Allen wrench. 10. Firmly tighten the inside Allen set screws. Mounting Refrigerator Handles A x2 B A x2 B B x2 A x2 B A Mounting Freezer Handle A A B x2 x2 B NOTE When tightening the Allen set screws, it is important that force be applied to the longer arm of the Allen wrench supplied in the handle packaging. NOTE All set screws should be tightened so the screw is below the surface of the handle. The handles should be drawn tight to freezer and refrigerator doors with no gaps. Opening the opposite door while tightening the Allen screw makes installation easier. The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on the handles.
![](/manual_guide/products/electrolux-erfc2393as-complete-owners-guide-0359c7b/15.png)