Electrolux ERFC2393AS Complete Owners Guide - Page 27

27 STORAGE FEATURES Shelves Reposition the Air Seal CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in dishwasher. You can easily adjust shelf positions in the refrigerator compartments to suit your needs. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment. Change the Position of a Shelf 1. Remove all food from shelf. 2. Lift the front edge up and pull the shelf out. For glass shelves: 1. Remove air seal by pushing seal straight back. 2. Position the air seal towards the outside edge of the shelf to avoid the air tower when shelf is pushed back into place. 3. Install seal by sliding the open channel end of the seal onto back edge of shelf until seal sits snug on back of shelf and flap sits at about a 10 degree angle from shelf surface. IMPORTANT Be aware of the air seal located at the rear of the shelf. Shelves located on the left side should have the air seal mounted on the far left side. Shelves located on the right side should have the air seal mounted on the far right side. This is to ensure there is no interference with the large air tower on the back wall of the cabinet. This also applies to the crisper shelves. 3. Replace by inserting the mounting bracket hooks into the desired support slots. 4. Lower the shelf and lock into position. To adjust slide-under shelf 1. Push front half shelf backward towards rear of cabinet until the rear half shelf drops down, then gently continue pushing front half shelf back and under the rear half shelf. Slide-Under Shelf