Electrolux ERFC2393AS Complete Owners Guide - Page 43

Concern, Potential Cause, Common Solution, Opening/Closing Of Doors/Drawers, Running of Refrigerator

Page 43 highlights

43 TROUBLESHOOTING Concern Potential Cause Common Solution Opening/Closing Of Doors/Drawers Door(s) will not close. • Door was closed too hard, causing other door to open slightly. • Close both doors gently. • Refrigerator is not level. • Ensure floor is level and solid, and can It rocks on the floor when adequately support the refrigerator. moved slightly. Contact a carpenter to correct a sagging or sloping floor. • Refrigerator is touching a wall or cabinet. • Ensure floor is level and solid, and can adequately support the refrigerator. Contact a carpenter to correct a sagging or sloping floor. Drawers are • Food is touching shelf on difficult to top of drawer. move. • Track that drawers slide on is dirty. • Remove top layer of items in drawer. • Ensure drawer is properly installed on track. Running of Refrigerator Compressor • Freezer control is set to does not "OF". run. • Refrigerator is in defrost cycle. • Clean drawer, rollers, and track. See Care & Cleaning. • Set freezer control. • This is normal for a fully automatic defrost refrigerator. The defrost cycle occurs periodically, lasting about 30 minutes. • Plug at electrical outlet is • Ensure plug is tightly pushed into disconnected. outlet. • House fuse blown or tripped circuit breaker. • Power outage. • Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker. • Check house lights. Call local electric company. Refrigerator • seems to run too much or too long. Your variable speed compressor is designed to run 100% of the time except during the defrost cycle. At times it will run faster, such as after a defrost cycle. • It is normal for the compressor to run continuously except during defrost mode. Digital Temperature Setting Display Digital • Electronic control temperature system has detected a displays an performance problem. error. • Call your Electrolux service representative, who can interpret any messages or number codes flashing on the digital displays.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

43
Concern
Potential Cause
Common Solution
Opening/Closing Of Doors/Drawers
Door(s) will
not close.
Door was closed too
hard, causing other door
to open slightly.
Refrigerator is not level.
It rocks on the floor when
moved slightly.
Refrigerator is touching a
wall or cabinet.
Close both doors gently.
Ensure floor is level and solid, and can
adequately support the refrigerator.
Contact a carpenter to correct a
sagging or sloping floor.
Ensure floor is level and solid, and can
adequately support the refrigerator.
Contact a carpenter to correct a
sagging or sloping floor.
Drawers are
difficult to
move.
Food is touching shelf on
top of drawer.
Track that drawers slide
on is dirty.
Remove top layer of items in drawer.
Ensure drawer is properly installed on
track.
Clean drawer, rollers, and track. See
Care & Cleaning.
Running of Refrigerator
Compressor
does not
run.
Freezer control is set to
“OF”.
Refrigerator is in defrost
cycle.
Plug at electrical outlet is
disconnected.
House fuse blown or
tripped circuit breaker.
Power outage.
Set freezer control.
This is normal for a fully automatic
defrost refrigerator. The defrost cycle
occurs periodically, lasting about 30
minutes.
Ensure plug is tightly pushed into
outlet.
Check/replace fuse with a 15 amp
time-delay fuse. Reset circuit breaker.
Check house lights. Call local electric
company.
Refrigerator
seems to run
too much or
too long.
Your variable speed
compressor is designed
to run 100% of the time
except during the defrost
cycle. At times it will run
faster, such as after a
defrost cycle.
It is normal for the compressor to run
continuously except during defrost
mode.
Digital Temperature Setting Display
Digital
temperature
displays an
error.
Electronic control
system has detected a
performance problem.
Call your Electrolux service
representative, who can interpret any
messages or number codes flashing
on the digital displays.
TROUBLESHOOTING