Epson 1000 ICS Basics - Page 36
Cleaning the EPSON 1000 ICS
View all Epson 1000 ICS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
8. Press down firmly on the ink cartridge clamp until it snaps in place. If you need to replace the other ink cartridge, repeat steps 4 through 8 before continuing with step 9. 9. Carefully lower the scanner and press it down until it clicks into place. Press the x Copy button. The EPSON 1000 ICS begins charging the ink delivery system. The POperate light flashes and the EPSON 1000 ICS makes noise. Charging takes about half a minute. When it's finished, the POperate light stops flashing and stays on, and the Error light goes out. Never turn off the EPSON 1000 ICS while the POperate light is flashing, unless the EPSON 1000 ICS hasn't moved or made noise for more than 5 minutes. Cleaning the EPSON 1000 ICS To keep your EPSON 1000 ICS operating at its best, you should clean it periodically. 1. Turn off the EPSON 1000 ICS, unplug the power cord, and disconnect the USB cable. 2. Remove all paper, then use a soft brush to clean any dust or dirt from the sheet feeder. 3. Clean the exterior with a soft, damp cloth. Maintenance 31