Epson 4880 Printer Guide - Page 127
Solving Problems, following table lists the messages in alphabetical order and includes an - set ink cartridge error
UPC - 010343866898
View all Epson 4880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Solving Problems | 127 When your ink or paper runs out or a problem occurs, a message appears on the LCD display, and the lights on the control panel come on or flash. The following table lists the messages in alphabetical order and includes an explanation and instructions for correcting the problem. Message CHANGE PAPER TYPE COMMAND ERROR DRIVER INK SET SETTING IS WRONG MISMATCH ERROR Note: These messages alternate. FEED SHEET PAPER FEED SHEET PAPER MANUALLY FORBIDDEN MEDIA FROM P. TRAY INK LOW REPLACE INK CRTG Light Explanation Response Paper light on Paper loaded does not match the source selected. Press the paper source button to select the correct setting: either (for paper in the tray, or or for roll paper). - You're using the wrong Press the pause button and hold it for 3 printer driver. seconds to cancel the print job. Make sure you installed the correct driver for your printer. Damaged data was sent to the printer or the data has an incorrect command. Press the pause button and hold it for 3 seconds to cancel the print job. The installed printer Stop printing, and press the pause button for driver is not correct for 3 seconds. Then make sure that the installed the printer. printer driver is correct for the printer. - The black ink cartridge Stop printing, and then press and hold the option does not match pause button for 3 seconds. Select the correct what is selected in the black ink cartridge option in the driver. See driver. page 112. If you want to continue printing, press the pause button. Non-Epson genuine ink Press the pause button for 3 seconds to cartridge is installed. cancel printing. If you want to continue printing, press the pause button. - Cut sheet needs to be Load the sheet in the manual feed slot. See loaded manually. page 38 for instructions. - Cut sheet needs to be Load the sheet in the manual feed slot. See loaded manually. page 38 for instructions. B Ink light flashing B Ink light on Ink cartridge(s) are nearly expended (printing continues). Ink cartridge(s) are expended (printing stops). Make sure you have replacement cartridges available. See page 105. Replace the ink cartridge(s) indicated on the LCD panel. See page 105 for instructions. 127