Epson ActionNote 660C User Manual - Page 40
Cleaning the Trackball, dry it thoroughly with a lint-free cloth.
View all Epson ActionNote 660C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Cleaning the Trackball If your trackball is not working properly, you may need to clean it. Follow these steps: 1. Insert the trackball removal tool that came with your computer into the two holes on the dial surrounding the trackball. Then turn the dial counterclockwise until it stops. 2. Use the tool, if necessary, to lift out the dial and the trackball. 3. Blow any dust out of the trackball base. If the metal rollers inside the base seem dirty, clean them gently with a cotton swab. 4. Wash the trackball with warm water and a mild soap; then dry it thoroughly with a lint-free cloth. 5. Place the trackball back in the base. 6. Place the dial over the trackball in the position it was in when you removed it. Then use the trackball tool to turn it clockwise until it locks into place. 2-8 Using Your Computer