Epson ActionTower 8000 User Manual - Page 111
Connecting the Drive and Power Cables, Locate pin 1 on the drive connector next to the power
View all Epson ActionTower 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Connecting the Drive and Power Cables Follow these steps to connect the drive and power cables: Note Make sure you connect a CD-ROM drive to the secondary IDE interface; do not use the same cable for a hard disk drive and a CD-ROM drive. 1. Locate the connector you will use on the drive cable. 2. Locate pin 1 on the drive connector next to the power connector. 3. Position the connector on the cable so that the red wire aligns with pin 1 on the drive. Installing and Removing Drives in the Slimline Computer 5-17
Connecting the Drive and Power Cables
Follow these steps to
connect
the drive and power cables:
Note
Make sure you connect a CD-ROM drive to the secondary
IDE interface; do not use the same cable for a hard disk drive
and a CD-ROM drive.
1.
Locate the connector you will use on the drive cable.
2.
Locate pin 1 on the drive connector next to the power
connector.
3.
Position the connector on the cable so that the red wire
aligns with
pin 1 on the drive.
Installing and Removing Drives in the Slimline Computer
5-17