Epson ActionTower 8000 User Manual - Page 150
Pass word Problems, Software Problems, You have forgotten your password
View all Epson ActionTower 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
If your drive came with documentation, check there for other possible solutions to the problem you are having. Password Problems You have forgotten your password You must discharge your CMOS memory. To do this, you need to change the setting of jumper JP6 to the On position. See "Changing the Jumper Settings" in Chapter 4 for details. After you have changed JP6, restart your system, leave it on for a few seconds, then turn it off again. This resets the SETUP values to their factory defaults. Both the Supervisor and the User passwords are disabled. Set jumper JP6 back to the Off position. Then turn on the computer again. If you want to set a new password, use SETUP as described under "Selecting the Security Setup Options" in Chapter 2. Software Problems Your operating system won't start after you installed the PCI IDE drivers. If you installed PCI IDE drivers for another operating system, such as UNIX, make sure you followed the instructions in the READ ME file for the drivers. See "Installing the PCI IDE Drivers" in Chapter 2 for instructions. Troubleshooting 7-13