Epson ActionTower 8000 User Manual - Page 98
Removing the Drive Mounting Bracket, Installing and Removing Drives in the Slim line Computer
View all Epson ActionTower 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removing the Drive Mounting Bracket Your computer has a 3.5-inch diskette drive and a hard disk drive installed in a mounting bracket. In order to install or remove any drives, you must first remove the drive mounting bracket. Follow these steps: 1. Remove the two cables from the diskette drive, as shown below. Grasp the connectors and pull them straight out so you do not bend the pins; do not pull on the cables. 2. Remove the two cables from the hard disk drive. 5-4 Installing and Removing Drives in the Slim line Computer
Removing the Drive Mounting Bracket
Your computer has a 3.5-inch diskette drive and a hard disk
drive installed in a mounting bracket. In order to install or
remove any drives, you must first remove the drive mounting
bracket. Follow these steps:
1.
Remove the two cables from the diskette drive, as shown
below. Grasp the connectors and pull them straight out so
you do not bend the pins; do not pull on the cables.
2.
Remove the two cables from the hard disk drive.
5-4
Installing and Removing Drives in the Slim line Computer