Epson B107011F User Manual - Page 16

Installing the SCSI Interface Board - + drivers

Get Epson B107011F - GT 10000 PDF manuals and user guides
UPC - 010343830202
View all Epson B107011F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installing the SCSI Interface Board You must install your SCSI board before installing the scanner driver and software applications. If you already have a SCSI board installed in your PC, skip this section. For additional installation information, see the documentation for your SCSI board or computer. 1. Turn off the computer and any peripheral devices. Unplug any power cords; then disconnect all cables from the back panel of your computer. 2. Remove the cover from your computer. Static electricity can damage electronic components. Ground yourself before you touch any of the computer's internal components by touching an unpainted metal surface inside the computer case. 3. Remove the slot cover from an empty PCI expansion slot in your computer. (Refer to your computer documentation for information about your PCI slots.) 4. Insert the SCSI interface board into the slot, then secure it with the bracket screw. 5. Replace the computer cover and reconnect all cables. 6. Continue with the following section, "Unlocking the Scanner." 10 Setting Up Your Scanner

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
10
Setting Up Your Scanner
Installing the SCSI Interface Board
You must install your SCSI board before installing the scanner driver and software
applications. If you already have a SCSI board installed in your PC, skip this section.
For additional installation information, see the documentation
for your SCSI board or computer.
1.
Turn off the computer and any peripheral devices. Unplug any power cords; then
disconnect all cables from the back panel of your computer.
2.
Remove the cover from your computer.
Static electricity can damage electronic components. Ground
yourself before you touch any of the computer’s internal
components by touching an unpainted metal surface inside
the computer case.
3.
Remove the slot cover from an empty PCI
expansion slot in your computer. (Refer to
your computer documentation for information
about your PCI slots.)
4.
Insert the SCSI interface board into the slot,
then secure it with the bracket screw.
5.
Replace the computer cover and reconnect all
cables.
6.
Continue with the following section,
“Unlocking the Scanner.”