Epson C11C456021 Printer Basics - Page 40

Loading Roll Paper, Avoid touching the printable surface of the roll

Get Epson C11C456021 - Stylus Photo 960 Color Inkjet Printer PDF manuals and user guides
UPC - 010343844186
View all Epson C11C456021 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Loading Roll Paper 1. Remove the tape and protective paper from the end of the roll. Then insert the holders into the roll of paper as shown. 2. Make sure the end of the paper is cut straight across, with 90° corners. If the end is cut diagonally, you may have problems feeding the paper. 3. If the paper curls at the end, fold a sheet of paper over the end and roll it backward to uncurl it. Avoid touching the printable surface of the roll paper. 4. Remove any paper that's in the sheet feeder at the top of the printer. Then remove the paper support, lower the output tray, and turn on the printer. Note: You can load and print on roll paper with the paper support (and sheets) in place. However, you may find it easier to remove them. 5. Make sure the adjust lever is set to the m position. 34 Printing on Roll Paper, CDs, DVDs, and Card Stock

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
34
Printing on Roll Paper, CDs, DVDs, and Card Stock
Loading Roll Paper
1.
Remove the tape and protective paper from the end
of the roll. Then insert the holders into the roll of
paper as shown.
2.
Make sure the end of the paper is cut straight across,
with 90° corners. If the end is cut diagonally, you
may have problems feeding the paper.
3.
If the paper curls at the end, fold a sheet of paper
over the end and roll it backward to uncurl it.
Avoid touching the printable surface of the roll
paper.
4.
Remove any paper that’s in the sheet feeder at the
top of the printer. Then remove the paper support,
lower the output tray, and turn on the printer.
5.
Make sure the adjust lever is set to
the
m
position.
Note:
You can load and print on roll paper with the
paper support (and sheets) in place. However, you
may find it easier to remove them.