Epson C11C456021 Printer Basics - Page 47

Removing Your Photos and Paper, Cut Sheet Mode, Print, Premium Semigloss Photo Paper, Quality, Speed

Page 47 highlights

6. Select Cut Sheet Mode unless you're printing a banner. 7. Click OK. Then open the File menu and click Print. 8. Select one of the following as the Media Type option, depending on the type of paper you're using: ■ Premium Semigloss Photo Paper ■ Premium Luster Photo Paper ■ Premium Glossy Photo Paper 9. Select Quality (for higher print quality) or Speed (for faster printing) using the slider. Then click Print. Continue with the steps in the next section to remove your photos. Removing Your Photos and Paper After your photos are printed and cut, you can either send another print job or remove the roll paper from the printer. 1. When the printer stops, press and release the z roll paper button to cut and eject the last photo. If you're not using the cutter, cut the paper on the printed line, then press and release the z roll paper button to feed the paper back into printing position. 2. When you're finished printing on roll paper, you need to "unload it" from the printer. Press the z roll paper button and hold it for three seconds. The paper feeds backwards out of the printer. You can also set the adjust lever to the ! position, then turn the knobs to roll up the paper. Make sure you return the adjust lever to the m position after you remove the paper. Printing on Roll Paper, CDs, DVDs, and Card Stock 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

Printing on Roll Paper, CDs, DVDs, and Card Stock
41
6.
Select
Cut Sheet Mode
unless you’re printing a banner.
7.
Click
OK
. Then open the File menu and click
Print
.
8.
Select one of the following as the Media Type option, depending on the type of
paper you’re using:
Premium Semigloss Photo Paper
Premium Luster Photo Paper
Premium Glossy Photo Paper
9.
Select
Quality
(for higher print quality) or
Speed
(for faster printing) using the
slider. Then click
Print
.
Continue with the steps in the next section to remove your photos.
Removing Your Photos and Paper
After your photos are printed and cut, you can either send another print job or
remove the roll paper from the printer.
1.
When the printer stops, press
and release the
z
roll paper
button to cut and eject the last
photo.
If you’re not using the cutter, cut
the paper on the printed line,
then press and release the
z
roll
paper button to feed the paper
back into printing position.
2.
When you’re finished printing on roll
paper, you need to “unload it” from the
printer. Press the
z
roll paper button and
hold it for three seconds. The paper feeds
backwards out of the printer.
You can also set the adjust lever to the
!
position, then turn the knobs to roll up the
paper. Make sure you return the adjust
lever to the
m
position after you remove the paper.