Epson C11C456021 Printer Basics - Page 60
Printing on Card Stock or Matte Board
UPC - 010343844186
View all Epson C11C456021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
You can print three density patterns on one disc. Each pattern is printed in a different location. After the first pattern is printed, adjust the setting, then repeat steps 4 through 6, selecting Second or Second Time to print the second pattern. If you want to try a third Color Correction setting, you can repeat steps 4 through 6 again and select Third or Third Time. 7. Remove the CD or DVD and let it dry for at least 24 hours. Then check the saturation levels again. Note: You can also use the Brightness and Contrast settings in Print CD to adjust color saturation. See page 45 for instructions. Printing on Card Stock or Matte Board You can use the front sheet feeder to print on white card stock or matte board up to 1.3 mm (.051 inch or 51 mil) thick, in the following sizes: letter, legal, or A4. You can also use the front sheet feeder to print on premium papers if necessary. Before you start, turn off the printer and remove the roll paper holder and cutter, if they're installed (see page 41 for instructions). Then turn the printer back on. (The printer must be on to load card stock correctly.) 1. Push in the output tray extensions, but leave the tray open. 54 Printing on Roll Paper, CDs, DVDs, and Card Stock