Epson EMP-7600 User Manual - Page 18
Connecting to a Laptop Computer, Connecting the Computer Cable - manual
View all Epson EMP-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
note To connect to desktops and other computer systems, see Appendix A. If you have an iBook with an RCA videoout port, follow the instructions for connecting to a video device on page 16. Connecting to a Laptop Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks, and hand-held devices. Connecting the Computer Cable Before you start, make sure your computer and the projector are turned off. 1. Connect one end of the computer cable to the projector's Computer 1 port. Computer 1 port computer cable note Laptop configurations vary. See your computer manual for the location of the ports needed to connect your projector. 2. Make sure the Computer 1 switch is flipped to the left (to the Analog position, as shown). If necessary, use the tip of a ballpoint pen to slide it over. Computer 1 switch (slide to left) 3. Connect the other end of the computer cable to your laptop's video-out or monitor port. If you're using a PowerBook and you can't connect the cable, you may need to use the Macintosh desktop adapter as shown on page 83 (available from EPSON; see page 8). 12 Setting Up the Projector