Epson EMP-7600 User Manual - Page 68

Resetting the Lamp Timer

Get Epson EMP-7600 PDF manuals and user guides View all Epson EMP-7600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

caution Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 6. Insert the new lamp as shown. 7. Make sure the lamp is fully seated, then tighten its screws. 8. Replace the lamp cover and tighten its screw securely. (The projector won't come on if the lamp cover is loose.) 9. Reset the lamp timer as described in the following section. Resetting the Lamp Timer After installing a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps: 1. Plug in the projector and turn it on (see page 22). 2. After the projection lamp comes on, press the Help button and hold it down for at least 5 seconds. You see the Help menu, and then the following message: Reset Lamp ON Time Do you reset the Lamp ON Time? Yes No :Select :Execute 62 Maintaining and Transporting the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
62
Maintaining and Transporting the Projector
6.
Insert the new lamp as shown.
7.
Make sure the lamp is fully seated, then tighten its screws.
8.
Replace the lamp cover and tighten its screw securely. (The
projector won
’
t come on if the lamp cover is loose.)
9.
Reset the lamp timer as described in the following section.
Resetting the Lamp Timer
After installing a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used. Follow
these steps:
1.
Plug in the projector and turn it on (see page 22).
2.
After the projection lamp comes on, press the
Help
button and
hold it down for at least 5 seconds.
You see the Help menu, and then the following message:
caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.
Reset Lamp ON Time
Do you reset the Lamp ON Time?
Yes
No
:Select
:Execute