Epson EMP-7600 User Manual - Page 21
Connecting to Video Sources
![]() |
View all Epson EMP-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. The projector supports HDTV, NTSC, PAL, and SECAM, and automatically detects the video format. (However, if you're using a 60-hertz PAL system, you'll need to select PAL60 in the Video menu, as described on page 47.) The projector can receive composite video, S-Video, and component video. You can connect one or more of these video sources at the same time. However, these sources share the same audio input port, so you can connect audio for only one of the sources (see page 19). The type of cable you use depends on whether you have composite video, S-Video, or component video. I For composite video, use the RCA video cable included with the projector. I For S-Video, use the S-Video cable supplied with your video device or obtain one from your electronics dealer. I For component video, you'll need a VGA-to-3BNC cable. You can purchase this from EPSON; see page 8. See the following illustration if you're not sure which type of connectors you have. note The projector does not support TV antenna cable F-connectors. composite video RCA connector S-Video 4-pin, mini-DIN component video BNC connector Follow the instructions below for your type of connection. Setting Up the Projector 15
![](/manual_guide/products/epson-7600-user-manual-74a4a02/21.png)