Epson ET-2850U for ReadyPrint Users Guide - Page 36
Wi-Fi Protected Setup (WPS), Other OS Devices, Parent topic, Related references, Related tasks
View all Epson ET-2850U for ReadyPrint manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5. Do one of the following: • Open the Epson Smart Panel app on your device and use the information on the LCD screen to select your product. Skip to step 7. • To connect without using the Epson Smart Panel app, press the left arrow button and go to the next step. 6. Do one of the following: • For iOS devices, select iOS and press the OK button. Scan the QR code with the camera app on your device and follow the instructions on your device. • For other types of devices, select Other OS Devices and press the OK button. Use your device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown. 7. Press the OK button to select Done on the LCD screen. The blue Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is enabled on the product. Note: If the Wi-Fi Direct icon is displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again. Parent topic: Wi-Fi Direct Mode Setup Related references Status Icon Information Related tasks Using the Epson Smart Panel Mobile App Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi Networking 36