Epson ET-2850U for ReadyPrint Users Guide - Page 37
Using WPS to Connect to a Network, Printing a Network Status Sheet
View all Epson ET-2850U for ReadyPrint manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using WPS to Connect to a Network If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the WPS button on your router. 2. On the product, press the home button, if necessary. 3. Press the arrow buttons to select Settings > Network Settings > Wi-Fi Setup > Wi-Fi (Recommended). 4. Press the OK button to select Proceed. 5. Press the arrow buttons to select Push Button Setup (WPS) and press the OK button. 6. Follow the instructions on the LCD screen to complete WPS setup. If the network connection is successful, the blue Wi-Fi icon is displayed on the LCD screen. Note: If the blue Wi-Fi icon is not displayed on the LCD screen, repeat these steps to try again. Parent topic: Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network. 1. Press the home button, if necessary. 2. Select Settings > Network Settings > Print Status Sheet. 37