Epson Equity LT-386SX User Manual - Page 121
DIP Switches A-5, diskette drive and drive B is an
![]() |
View all Epson Equity LT-386SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
ON' Enables the serial port. OFF Disables the serial port. 5 ON* Selects parallel port 1 (LPT1, I/O addresses 378H through 37FH) as the parallel port. OFF Selects parallel port 2 (LPT2, I/O addresses 278H through 27FH) as the parallel port. 6 ON* Enables the parallel port. OFF Disables the parallel port. ON Defines the internal diskette drive as drive B. (When this switch is ON, the internal drive is defined as both A and B, and an optional external drive is effectively disabled.) OFF* Defines the external diskette drive as drive B. ON' Must be ON. *Default setting Switch 1 allows you to exchange the definitions for diskette drives A and B. When switch 1 is ON (the factory setting) drive A is the internal 3 '/z-inch diskette drive and drive B is an optional external 5 '/+inch diskette drive. By turning switch 1 to OFF, you define the internal diskette drive as B and the optional external drive as A. Switch 2 defines the primary display. The LT-386SX recognizes the LCD as the primary display, unless it detects that an external monitor has been connected to the RGB VIDEO port. If an external monitor is connected, it becomes the primary display. When switch 2 is ON (the factory setting) the primary display is defined as a color display. The LCD translates colors into 16 shades of gray. When switch 2 is OFF, the primary display is monochrome. DIP Switches A-5
![](/manual_guide/products/epson-equity-lt386sx-user-manual-ea794ea/121.png)