Epson Equity LT-386SX User Manual - Page 163
Disk Drive type, Interleave, The default value is 3. When you execute the Auto Interleave
![]() |
View all Epson Equity LT-386SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Disk drive type The program displays the following prompt for the disk drive type: Disk Drive type ? 2 Select drive type 2 for a 20MB drive or drive type 17 for a 40MB drive. The program determines the type of hard disk drive based on the settings in CMOS RAM. A pop-up window on the screen lists 47 possible drive types. This allows for the possibility of additional hard disk drives in the future. If you select the User Defied hard disk drive, you must provide the following information: Number of cylinders Number of heads Number of sectors per track Write precom Write precom cylinder number Landing zone Interleave factor The program displays the following prompt for the interleave factor: Interleave (1-16) ? The interleave factor affects the performance of your hard disk. The default value is 3. When you execute the Auto Interleave test, the diagnostics program determines the best interleave value for your hard disk and formats the hard disk for this interleave factor. If you enter an interleave value in response to the Interleave prompt, you override the value set by the program. Only do this if the documentation with your hard disk recommends a different value. D-22 System Diagnostics
![](/manual_guide/products/epson-equity-lt386sx-user-manual-ea794ea/163.png)