Epson Equity LT-386SX User Manual - Page 122
the port is LPT2., switch is ON the factory setting, the port is LPT1; if it is OFF
View all Epson Equity LT-386SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Switch 3 tells the computer whether you want the internal serial port (labeled RS232C on the right side of the computer) to be COM1 or COM2. When switch 3 is ON (the factory setting), the serial port is COM1; when it is OFF, the port is COM2. When switch 4 is ON (the factory setting), the internal serial port is enabled; if it is OFF, the serial port is disabled. If the RS-232C port on the Equity LT-386SX conflicts with the serial port on an option card you have installed, you will not be able to use the port on the option card unless you disable the internal serial port. Switch 5 defines the internal parallel port (labeled PRINTER on the right side of the computer) as LPT1 or LPT2. If the switch is ON (the factory setting), the port is LPT1; if it is OFF, the port is LPT2. When switch 6 is ON (the factory setting), the internal parallel port is enabled; if it is OFF, the parallel port is disabled. When switch 7 is ON, the internal drive is defined as both drives A and B. When switch 7 is OFF (the factory setting), the external drive is B. Switch 8 is not used, and always must be ON. A-6 DIP Switches